SGR0831乙二醇制冷系統緩蝕劑（全有機型）

1. 產品介紹

本產品為多種緩蝕劑復合而成，透明液體，主要用于乙二醇制冷系統的緩蝕。

2. 性能指標

3.性能用途

本產品為全有機系高效緩蝕劑，是乙二醇溶液介質中金屬的高效緩蝕劑。能有效保護乙二醇水溶液系統中的碳鋼、銅等金屬免受介質腐蝕損傷，延長系統使用壽命，大幅降低系統及設備維修次數和費用。

本品能有效防止乙二醇水溶液對金屬系統的化學腐蝕及電偶腐蝕損傷，緩蝕率達95%以上。

3. 使用方法

●初始加藥：

根據系統總?cè)莘e（m³），新系統按每m³乙二醇水溶液加入本品2-3kg，腐蝕嚴重系統，按每m³乙二醇水溶液加入本品5-6kg。具體視系統腐蝕程度而定，計算初始總加藥量，將該藥量一次性緩慢加入系統并混合均勻。

●補充加藥：

系統正常運行后，每半年補充加藥一次。補充加藥量按每m³ 乙二醇水溶液加入本品1-2kg，將該藥量一次性緩慢加入系統并與乙二醇水溶液混合均勻。

●注意事項：

使用本品前須先對設備系統進行維修檢漏，使系統無泄漏，否則會損失冷卻介質和緩蝕劑，影響使用效果。本品禁止與其它添加劑混用。

4. 包裝與貯運

(1)本品采用塑料桶包裝，25Kg/桶，1t/桶或根據客戶需要確定。

(2)與易燃、可燃物、還原劑、酸類、堿類等物質分開存放，切忌混儲。

(3)貯區應備有泄漏應急處理設備和合適的收容材料。

5. 安全與防護

(1)避免吸入、食入，操作人員必須佩戴好防護眼鏡、防酸堿手套。

(2)工作過程中不準進食、飲水，注意通風或局部排風，工作完畢用肥皂和清水洗手。

(3)裝卸時防止碰撞，注意密封，防止包裝及容器損壞。

Erosion inhibitor of ethylene glycol refrigeration system (all models)SGR0831

1. product presentation

This product is a variety of corrosion inhibitors, transparent liquid, mainly used for corrosion of ethylene glycol cooling system.

2. performance index

3. Performance and use

This product is a high efficiency corrosion inhibitor of metals in ethylene glycol solution medium. It can effectively protect the carbon steel, stainless steel, copper and other metals in the ethylene glycol aqueous solution system from the medium corrosion damage, prolong the service life of the system, and greatly reduce the number and cost of the system and equipment maintenance.

This product can effectively prevent the chemical corrosion and electrocouple corrosion damage of the metal system, and the corrosion inhibition rate is more than 98%.

3. usage method

● initial dosing:

According to the total system volume (m3), add 8-10kg of water of ethylene glycol solution per m3. Depending on the corrosion degree of the system, the initial total dose is calculated, and the dose is slowly added to the system at one time and mixed evenly.

● supplement:

After the system is running normally, it will be added once a year. Add 1-2kg per m3 of ethylene glycol solution slowly to the system at one time and mix evenly with ethylene glycol solution.

● matters need attention:

Before using this product, the equipment system to repair the leakage, so that the system has no leakage, otherwise the cooling medium and corrosion inhibitor will be lost, which will affect the use effect. This product is prohibited to mix with other additives.

4. Packaging and storage

(1) This product is packaged in plastic bucket, 25 Kg / barrel, 1t / barrel or determined according to customer needs.

(2) With flammable, combustible, reducing agent, acid, alkali and other substances stored separately, avoid mixed storage.

(3) The storage area shall be equipped with leakage emergency treatment equipment and suitable receiving materials.

5. Safety and protection

(1) Avoid inhalation and feeding, operators must wear protective glasses and acid-alkali gloves.

(2) Do not eat or drink water during work, pay attention to ventilation or local air exhaust, and wash hands with soap and water after work.

(3) Prevent collision during loading and unloading, pay attention to sealing, and prevent damage to packaging and containers.