发货地： 山东济宁
本產品為淺黃色透明液體，受熱后迅速自行分解，在堿性狀態時較穩定，主要用于氨氮的去除。
超高性价比
三个工作日内发货
24小时在线技术服务
品 名：氨氮去除劑（液體）
型 號：SGR0622
理化指標：
產品簡介：本產品為淺黃色透明液體，受熱后迅速自行分解，在堿性狀態時較穩定，主要用于氨氮的去除。
使用方法：本產品作為氨氮去除劑，可直接投入污水池使用，產品投入后根據實際情況采用曝氣或攪拌方法進行反應，至少需反應0.5h方能產生最佳效果。
包 裝：本品采用塑料桶或罐車包裝，根據客戶需要確定；本產品儲存在陰暗、通風的庫房，并遠離火種和高溫。
Ammonia nitrogen remover SGR0622
1. Product introduction
This product is a light yellow transparent liquid, which decomposes itself quickly when heated, and is more stable in alkaline state. It is mainly used for the removal of ammonia nitrogen in all kinds of water.
2. Performance index
Product appearance | Light yellow transparent liquid |
PH (1% aqueous solution) | ≥10.0 |
Density (20 ℃) | ≥1.1g/cm3 |
Water insoluble matter (%) | ≤0.1 |
3. Usage
As an ammonia nitrogen remover, this product can be directly put into the sewage tank. After the product is put into use, aeration or mixing methods are used according to the actual situation, and it takes at least 0.5 h to produce the best effect.
4. Packaging and storage and transportation
(1)This product is packed in plastic buckets, 25Kg/ buckets, 1t/ buckets or determined according to customer needs.
(2)This product is stored in a dark, ventilated warehouse, away from fire and high temperature, and the storage temperature should not exceed 30 ℃.
(3)Separate from flammable, combustible, reducing agents, acids, alkalis and other substances, do not mix storage.
(4)The storage area shall be provided with emergency leakage handling equipment and suitable reception materials.
(5)This product is not suitable for long-term storage.
5. Safety and protection
(1)To avoid inhalation and ingestion, operators must wear protective glasses, acid-and-alkali gloves, protective mouth masks and work caps, and wear protective clothing against acid and alkali if necessary.
(2)Do not eat or drink in the course of work, pay attention to ventilation or local ventilation, and wash hands with soap and water after work.
(3)Prevent collision during loading and unloading, pay attention to sealing, and prevent packaging and container damage.
(4)Barbaric loading and unloading should be prohibited in the process of loading and unloading to ensure that the container does not leak, collapse, fall or damage, so as to prevent the solution from splashing and injuring during the loading and unloading process.
Copyright © 2021.@欣格瑞（山东）环境科技有限公司 All rights reserved.
网站部分资源来源于网络，无法和版权者联系，无意侵犯，如有侵权请联系我们删除
备案号：魯ICP備09087608號
